BlastTexBlastTex / Service area
Based in Hurst. Serving DFW, North Texas and Projects Across Texas.
BlastTex arrives fully equipped with shot blasters, HEPA dust collectors, a generator, a sweeper and scrubbers, so there is nothing for you to rent, power or set up. We are built to serve towns without a local prep contractor or equipment rental yard.
Travel zones
Your zone is set by driving miles from Hurst (76053), and we confirm it on your written proposal. A larger floor carries a smaller travel cost per square foot, because travel costs about the same for a small or large project. More than 100 miles out? Send photos and a walk-around video for a free ballpark first.
| Distance from Hurst | Travel fee (each round trip) | Commercial site visit | Homeowner deposit |
|---|---|---|---|
| Zone 1: 0 to 50 miles | No travel charge | Free site walk | $250 |
| Zone 2: 51 to 100 miles | $425 | $250, credited if you hire us | $500 |
| Zone 2: 101 to 150 miles | $650 | $400, credited if you hire us | $650 |
| Zone 3: 151+ miles | Travel and lodging quoted per job | Quoted before the visit, credited if you hire us | Shown on your quote |
- Travel fees are added to the prices listed on each service page.
- Multi-day jobs: the travel fee applies to each round trip. If the crew stays overnight near the job, lodging is quoted instead.
- The homeowner deposit is applied to your total and refunded if you cancel at least 72 hours ahead.
- Commercial customers without an approved account pay the travel fee when the job is scheduled, refunded with at least 72 hours’ notice.
- More than 100 miles out? Send photos and a short walk-around video first for a free ballpark estimate before anyone drives out. A ballpark is not a quote; your price is set in your written proposal.
Full details are on your written proposal.
Towns and cities we serve
These are examples, not limits. If your town is not listed, text your city and a few photos.
Dallas–Fort Worth
Our home base. Most DFW projects fall in Zone 1, with no travel charge.
- Hurst
- Bedford
- Euless
- North Richland Hills
- Grapevine
- Keller
- Southlake
- Fort Worth
- Arlington
- Mansfield
- Burleson
- Grand Prairie
- Irving
- Dallas
- Garland
- Mesquite
- Carrollton
- Lewisville
- Denton
- Plano
- Frisco
- McKinney
- Allen
- Rockwall
Jobs here include 14,000 linear feet of line removal in an Irving distribution warehouse, a 200,000 sq ft tenant-turnover sweep and scrub in Grand Prairie, and shop floors in Fort Worth.
East of Dallas
Growing towns along I-30, I-20, and US-80.
- Forney
- Terrell
- Kaufman
- Royse City
- Greenville
- Sulphur Springs
- Canton
- Tyler
- Longview
North Texas & the Red River
North toward the Red River and Oklahoma.
- Decatur
- Gainesville
- Sherman
- Denison
- Bonham
- Paris
- Wichita Falls
West of Fort Worth
Out I-20 and US-377.
- Weatherford
- Mineral Wells
- Granbury
- Stephenville
- Abilene
South along I-35 and I-45
Down to Waco and the lumber and distribution towns south of Dallas.
- Cleburne
- Midlothian
- Waxahachie
- Ennis
- Corsicana
- Hillsboro
- Waco
- Temple
Projects here include 1,500 sq ft of bay line removal and stripe-path preparation at a lumber distribution warehouse in Ennis.
Across Texas
Larger projects anywhere in the state, quoted case by case.
- Houston area
- Austin
- San Antonio
- College Station
- Lubbock
- Amarillo
- Midland–Odessa
Completed projects include garage preparation for epoxy in Pearland, approximately five hours from Hurst. Projects in Oklahoma, Louisiana and Arkansas may also be considered.
Travel questions
Do you serve smaller towns?
Yes. BlastTex is mobile and brings everything required. Within about 3 to 4 hours of Hurst is our regular range, and larger projects anywhere in Texas are welcome. Send photos and your city, and we will tell you what the trip costs before you commit.
How is travel priced?
By driving miles from Hurst (76053). Within 50 miles, there’s no travel charge. From 51 to 100 miles, the travel fee is $425 per round trip, and from 101 to 150 miles it’s $650. Past 150 miles, travel and lodging are quoted per job. Every travel charge is on your written proposal, and commercial jobs within 50 miles get a free site walk.
Do I need to provide power or rent anything?
No. We haul the shot blasters, HEPA dust extractors, our own generator, and our sweeping and scrubbing equipment in our own trailer. If there’s building power near the work area, tell us on the quote form.
Is a bigger job a better deal when you travel?
Usually. Travel costs about the same whether the floor is 2,000 or 20,000 square feet, so on a large floor it’s a much smaller share of the total. Grouping several areas or buildings into one trip helps too.
Is my town on your list?
If it isn’t listed, ask anyway. These are examples, not limits. Text your city and a few photos to 817-600-8452.
Request a written proposal for your town
Text your city, approximate square footage and a few photos of the floor. Chris personally reviews every request and returns calls and texts the same day. Written proposals within 24–48 hours.